Step
| Action
| Normal Result(s)
| Abnormal Result(s)*
|
1
| Turn the ignition key to
the RUN position with the driver's seatbelt unbuckled.
|
| • | The audible alarm sounds for 5 seconds. |
| • | The safety belt lamp flashes for 15 seconds. |
|
|
2
|
- Turn the ignition key OFF and then turn the ignition key ON.
- Buckle the driver's seatbelt.
| The alarm
and the light turn off when the belt is buckled.
|
|
3
|
- Open the driver's door with the ignition key in the ignition switch.
- Close the driver's door.
- Remove the key from the ignition switch.
|
| • | The audible alarm sounds while the key is in the ignition and
the left door is open. |
| • | The audible alarm turns off when the door is closed. |
| • | The audible alarm turns off when the key is removed. |
|
|
4
|
- Turn the park lamps ON.
- Turn the ignition switch OFF.
| The audible
alarm sounds.
|
|
5
| Turn
the ignition switch ON.
| The audible alarm turns off.
|
|
6
|
- Start the vehicle.
- Drive the vehicle on a road where you can reach a speed over 120
km\h safely.
| The audible alarm will
sound at speeds in excess of 120 km\h.
|
Overspeed Chime Inoperative
|
* Refer to the appropriate symptom diagnostic table for the applicable
abnormal result.
|
