Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the Audible Warning System Check performed? | -- | Go to Step 2 | |
2 |
Is continuity present? | -- | Go to Step 3 | Go to Step 4 |
3 | Locate and repair the short to ground on the CKT 80 (LT GRN) wire between the multifunction alarm module and connector C200. Is the repair complete? | -- | -- | |
4 | Reconnect the connector at the multifunction alarm module. Is the alarm present? | -- | Go to Step 5 | Go to Step 6 |
5 | Replace the multifunction alarm module. Is the repair complete? | -- | -- | |
6 |
Is continuity present? | -- | Go to Step 7 | Go to Step 8 |
7 | Locate and repair the short to ground in the CKT 80 (LT GRN) pigtail wire in the steering column. Is the repair complete? | -- | -- | |
8 | Connect a J 39200 DMM between the connector C200 cavity B4 for the CKT 159 (TAN) pigtail wire and ground. Is continuity present? | -- | Go to Step 9 | Go to Step 10 |
9 | Locate and repair the short to ground in the CKT 159 (TAN) pigtail wire in the steering column. Is the repair complete? | -- | -- | |
10 | Connect a J 39200 DMM between the Key - In - Warning switch CKT 80 (LT GRN) pigtail lead and the CKT 159 (TAN) pigtail lead. Is continuity present? | -- | Go to Step 11 | Go to Step 12 |
11 | Replace the Key - In - Warning switch. Is the repair complete? | -- | -- | |
12 |
Is continuity present? | -- | Go to Step 13 | Go to Step 14 |
13 | Locate and repair the short to ground in the CKT 159 (TAN) wire between connector C200 and the LF door jamb switch. Is the repair complete? | -- | -- | |
14 | Replace the LF door jamb switch. Is the repair complete? | -- | -- |
