GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 1999 🢒 Savana 🢒 Body and Accessories 🢒 Instrument Panel, Gauges, and Console 🢒 Fasten Safety Belt Indicator/Chime Always On

Fasten Safety Belt Indicator/Chime Always On Domestic

Step

Action

Value(s)

Yes

No

1

Was the Audible Warnings System Check performed?

--

Go to Step 2

Go to Audible Warnings System Check

2
  1. Place the ignition switch in the RUN position.
  2. Disconnect the connector at the multi-function alarm module.
  3. Disconnect the connector at the instrument cluster.
  4. Connect an unpowered test lamp between the multi-function alarm module connector, cavity C2 for CKT 234 (YEL), and ground.

Does the test lamp light?

--

Go to Step 3

Go to Step 4

3

Repair the short to voltage in CKT 234 (YEL) between the multi-function alarm module and the instrument cluster.

Does the fasten safety belt indicator remain illuminated?

--

Go to Step 4

Go to Audible Warnings System Check

4
  1. Reconnect the connector at the multi-function alarm module.
  2. Connect an unpowered test lamp between the instrument cluster connector, cavity A12 for CKT 234 (YEL), and ground.

Does the test lamp light?

--

Go to Step 5

Go to Step 6

5

Replace the multi-function alarm module.

Does the fasten safety belt indicator remain illuminated?

--

Go to Step 6

Go to Audible Warnings System Check

6

Replace the instrument cluster.

Does the fasten safety belt indicator remain illuminated?

--

Go to Audible Warnings System Check

--

Fasten Safety Belt Indicator/Chime Always On Export

Step

Action

Value(s)

Yes

No

1

Was the Audible Warnings System Check performed?

--

Go to Step 2

Go to Audible Warnings System Check

2
  1. Turn the ignition switch to the RUN position.
  2. Disconnect the connector C1 at the multifunction alarm module.
  3. Disconnect the connector at the instrument cluster.
  4. Connect an unpowered test lamp between the following components:
    5. • The multifunction alarm module connector C1 cavity C2 for the CKT (YEL) wire
    • Ground

Did the test lamp light?

--

Go to Step 3

Go to Step 4

3
  1. Locate the short to voltage in the CKT 234 (YEL) wire between the following components:
    2. • The multifunction alarm module
    • The instrument cluster
  2. Repair the short to voltage in the CKT 234 (YEL) wire between the following components:
    3. • The multifunction alarm module
    • The instrument cluster

Is the repair complete?

--

Go to Audible Warnings System Check

--

4
  1. Connect the connector C1 at the multifunction alarm module.
  2. Connect an unpowered test lamp between the following components:
    3. • The instrument cluster connector cavity A12 for the CKT 234 (YEL) wire
    • Ground

Did the test lamp light?

--

Go to Step 5

Go to Step 6

5

Replace the multifunction alarm module.

Is the repair complete?

--

Go to Audible Warnings System Check

--

6

Replace the instrument cluster.

Is the repair complete?

--

Go to Audible Warnings System Check

--