GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2007 🢒 Sierra Classic - 2WD 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Generator Battery Control Module Replacement

Generator Battery Control Module Replacement 5.3L Engine w/RPO HP2

Removal Procedure

    Object Number: 1403618 Size: SH
  1. Disconnect the battery service disconnect/connect. Refer to Hybrid Battery Service Disconnect/Connect .
  2. Remove the battery cover. Refer to Battery Cover Replacement .
  3. Remove the control module nuts.
  4. Lift the control module up off of the studs.
  5. Disconnect the control module electrical connectors.
  6. Remove the control module.

Installation Procedure

    Object Number: 1403618 Size: SH
  1. Connect the control module electrical connectors.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the control module.
  3. Install the control module nuts.

    4. Tighten
    Tighten the nuts to 6 N·m (53 lb in).

  4. Install the battery cover. Refer to Battery Cover Replacement .
  5. Program the energy storage control module. Refer to Control Module References for programming and setup information.