GM Service Manual Online
For 1990-2009 cars only

Object Number: 1645005  Size: MF

Callout

Component Name

Caution: Replace the passenger presence system as a complete assembly to prevent possible injury to the occupant. All the components in the service kit are assembled and calibrated as a unit. Using only some of the components in the service kit will cause the passenger presence system to operate improperly.

Caution: To avoid personal injury, perform a preload test on the passenger presence system whenever you remove or replace the seat cushion trim. Failure to do so may cause the system to malfunction.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

  1. Remove the front seat. Refer to Driver and Passenger Seat Replacement .
  2. Remove the seat cushion cover. Refer to Front Seat Cushion Cover and Pad Replacement .
  3. Re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is removed. Refer to Control Module References for programming and setup information.

1

Inflatable Restraint Front Passenger Presence System Assembly

Tip

    • The passenger presence system is an integral part of the pad on the passenger seat cushion.
    • The sensor, module and seat cushion pad must be replaced as a unit.