For 1990-2009 cars only
Removal Procedure
- Remove the left body side trim panel. Refer to Body Side Trim Panel Replacement - Left Side in Interior Trim.
- Remove the cooling tube from the case and the motor.
- Remove the electrical connectors.
- Remove the screws that retain the blower motor to the case.
- Remove the blower motor and the fan assembly from the case.
Installation Procedure
- Install the blower motor and the fan assembly to the case.
- Install the screws that retain the blower motor to the case.
- Install the electrical connectors.
- Install the cooling tube to the motor and to the case.
- Install the left body side rear trim panel. Refer to Body Side Trim Panel Replacement - Left Side in Interior Trim.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the screws that retain the blower motor to the case to 2 N·m
(18 lb in).
