GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2000 🢒 Safari - 2WD 🢒 HVAC 🢒 Heating, Ventilation and Air Conditioning 🢒 Temperature Actuator Replacement

Removal Procedure
  1. Remove the engine cover. Refer to Engine Cover Replacement in Interior Trim.

    2. Object Number: 404930 Size: SH
  2. Remove the screws that retain the actuator to the heater assembly.

    3. Object Number: 280412 Size: SH
  3. Remove the electrical connector (2).
  4. Remove the actuator from the heater assembly.

Installation Procedure
  1. Install the actuator to the heater assembly.

    2. Object Number: 280412 Size: SH
  2. Install the electrical connector (2).

    3. Object Number: 404930 Size: SH
  3. Install the screws that retain the actuator to the heater assembly.

    4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

    Tighten
    Tighten the screws that retain the actuator to the heater assembly to 2  N·m (18 lb in).

  4. Install the engine cover. Refer to Engine Cover Replacement in Interior Trim.