Transfer Case Shift Control Switch Replacement GMC, Buick

1. Remove the floor console. Refer to Console Replacement in Instrument Panel, Gages, and Console.



2. Remove the trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement in Instrument Panel, Gages, and Console.
3. Push in on the two tabs securing the control switch to the trim plate.
4. Move the control switch toward the front of the trim plate.
5. Remove the control switch.



6. Disconnect the electrical connector from the control switch.

1. Install the electrical connector to the control switch.




Important: When installing the control switch in the trim plate, a snap should be felt or heard.

2. Install the control switch in the trim plate.



3. Install the trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement in Instrument Panel, Gages, and Console.



4. Install the floor console. Refer to Console Replacement in Instrument Panel, Gages, and Console.

Transfer Case Shift Control Switch Replacement Chevrolet

1. Remove the bezel cover. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement in Instrument Panel, Gages, and Console



2. Push in on the two tabs on the side of the control switch.
3. Move the control switch toward the front of the trim plate.
4. Disconnect the electrical connector.
5. Remove the control switch.

1. Install the electrical connector to the control switch.

Important: When installing control switch in the trim bezel, a snap should be felt or heard.

2. Install the control switch in the bezel cover.




Important: Ensure that the bezel cover is properly seated before installing the trim screws.

3. Install the bezel cover. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement in Instrument Panel, Gages, and Console