GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 TrailBlazer - 2WD 🢒 Body Systems 🢒 Mirrors 🢒 Outside Rearview Mirror Replacement

Outside Rearview Mirror Replacement Door Mounted

Removal Procedure
  1. Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement .
  2. Remove the outside rear view mirror (ORVM) harness from the door.

    3. Object Number: 763318 Size: SH
  3. Remove the side door insulator.

    4. Object Number: 714015 Size: SH
  4. Remove the 3 ORVM retaining bolts.
  5. Release the clip that retains the ORVM to the door.
  6. Remove the ORVM assembly from the door.

Installation Procedure

    Object Number: 714015 Size: SH
  1. Install the ORVM assembly to the door. Ensure that the retaining clip is fully seated.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the 3 ORVM retaining bolts.

    3. Tighten
    Tighten the bolts to 10 N·m (88 lb in).


    Object Number: 763318 Size: SH
  3. Install the side door insulator.
  4. Install the ORVM harness to the door.
  5. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement .

Outside Rearview Mirror Replacement Fender Mounted


Object Number: 1990147 Size: MF

Callout

Component Name

1

Outside Rearview Mirror Cover

Caution: Approved safety glasses and gloves should be worn when performing this procedure to reduce the chance of personal injury.

Procedure

  1. Apply masking tape to the base of the mirror to protect the fender when removing.
  2. Do this from the side of the mirror cover and base using a suitable tool, release the cover from the base of the mirror.

2

Outside Rearview Mirror Screws (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
10 N·m (89 lb in)

3

Outside Rearview Mirror

Procedure

Remove the masking tape, inspect the window for proper operation .