GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Tahoe Limited 🢒 HVAC 🢒 Heating, Ventilation and Air Conditioning 🢒 Control Assembly Replacement

Removal Procedure
  1. Remove the bezel--IP cluster. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement in Instrument Panel, Gauges and Console.
  2. Remove the radio. Refer to Radio Replacement in Entertainment.

    3. Object Number: 363024 Size: SH
  3. Remove the heater control assembly by firmly depressing and holding the retaining tabs and then sliding the assembly away from the dash.

    4. Object Number: 482493 Size: SH
  4. Disconnect the temperature and mode cables from the back of the control head.
  5. Disconnect the electrical connection from the control head.
  6. Remove the control head.

Installation Procedure
  1. Connect the electrical connection to the control head.

    2. Object Number: 482493 Size: SH
  2. Connect the temperature and mode cables to the back of the control head.

    3. Object Number: 363024 Size: SH
  3. Install the control head to the IP carrier until a snap is heard.
  4. Install the radio. Refer to Radio Replacement in Entertainment.
  5. Install the bezel--IP cluster. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement in Instrument Panel, Gauges and Console.