GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Tahoe Limited 🢒 Body and Accessories 🢒 Instrument Panel, Gauges, and Console 🢒 Instrument Panel Cluster Trim Plate Bezel Replacement

Removal Procedure

    Object Number: 277080 Size: SH
  1. For vehicles equipped with tilt wheel, move the steering column to the lowest position, if the vehicle is not equipped with a tilt steering column, you may have to lower the column. Refer to Steering Column Replacement in Steering.
  2. Remove the four clips across the top edge, and the four clips across the bottom edge that retain the bezel to the IP by gently pulling toward the inside of the vehicle.
  3. Disconnect the electrical connectors from the headlamp switch and the accessory switches.

Installation Procedure

    Object Number: 277080 Size: SH
  1. Connect the electrical connectors for the headlamp switch and the accessory switches.
  2. Press the bezel into the IP making sure that the clips line up with the holes in the IP.
  3. Install the steering column back into position. Refer to Steering Column Replacement in Steering.