Caution: If a window is cracked but still intact, crisscross the window with
masking tape in order to reduce the risk of damage or personal injury.
Important: Before cutting out a window, apply a double layer of masking tape around the perimeter of the painted surfaces and interior trim.
- Remove the window lower garnish molding. Refer to
Rear Window Lower Garnish Molding Replacement
.
- Remove both rear seat headrests (extended cab). Refer to
Head Restraint Replacement
.
- Remove the rear sea (extended cab) only. Refer to
Rear Seat Replacement
.
- Remove the rear sliding window regulator motor bolt , if equipped. Refer to
Rear Sliding Window Regulator Replacement
.
Caution: If broken glass falls into the defroster outlets, it can be blown into
the passenger compartment and cause personal injury.
- Cover to protect the following parts from broken glass:
| 5.2. | Defroster outlets and A/C outlets |
Caution: When working with any type of glass or sheet metal with exposed or rough
edges, wear approved safety glasses and gloves in order to reduce
the chance of personal injury.
Important: Keep the cutting edge of the tool against the window.
- This will allow the urethane adhesive to be separated from the window.
| • | Leave a base of urethane on the pinchweld flange. |
| • | The only suitable lubrication is clear water. |
- Open the window, if equipped.
- With the aid of an assistant, remove the window from the opening.
