GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 SSR 🢒 Body and Accessories 🢒 Seats 🢒 Seat Back Cushion Side Bolster Panel Replacement

Removal Procedure
  1. Remove the seat from the vehicle. Refer to Seat Replacement .
  2. Remove the seat back cover. Refer to Front Seat Back Cushion Cover and Cushion Pad Replacement .
  3. Remove the inflatable restraint side impact module. Refer to Driver and Passenger Seat Side Inflatable Restraint Module Replacement in SIR.

    4. Object Number: 1200425 Size: SH
  4. Remove the 2 screws that retain the seat back cushion side bolster panel to the seat back frame.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1200425 Size: SH
  1. Install the 2 screws that secure the seat back cushion side bolster panel to the seat back frame.

    2. Tighten
    Tighten the seat back cushion side bolster panel screws to 6.25 N·m (55 lb in).

  2. Install the inflatable restraint side impact module. Refer to Driver and Passenger Seat Side Inflatable Restraint Module Replacement in SIR.
  3. Install the seat back cover. Refer to Front Seat Back Cushion Cover and Cushion Pad Replacement .
  4. Install the seat in the vehicle. Refer to Seat Replacement .