GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the seat from the vehicle. Refer to Seat Replacement .

  2. Object Number: 1229820  Size: SH
  3. Disconnect the 4 electrical connectors (2) from the memory seat control module (1).

  4. Object Number: 1229823  Size: SH
  5. Remove the screw (1) that secures the memory seat control module to the seat.
  6. Remove the memory seat control module from the seat.

Installation Procedure


    Object Number: 1229823  Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  1. Position the memory seat control module in the mounting bracket.
  2. Install the screw (1) securing the memory module to the seat.
  3. Tighten
    Tighten the memory seat control module screw to 1.5 N·m (13 lb in).


    Object Number: 1229820  Size: SH
  4. Connect the 4 electrical connectors (2) to the memory seat control module (1).
  5. Install the seat in the vehicle. Refer to Seat Replacement .