Step | Action | Value(s) | Yes | No |
---|---|---|---|---|
1 | Were you sent here from the Wiper/Washer System Check? | -- | ||
2 | Inspect the WIP fuse for continuity. Does the WIP fuse have continuity? | -- | ||
3 |
Was B+ tested? | -- | ||
4 | Replace the windshield wiper/washer switch. Refer to Windshield Wiper and Washer Switch Replacement . Is the repair complete? | -- | -- | |
5 | Repair/replace junction block 2. Refer to Instrument Panel Wiring Harness Replacement and Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
6 |
Is there continuity from cavity 4 to ground? | -- | ||
7 | Repair the short to ground condition between cavity 4 of connector C3 of junction block 2 and the windshield wiper motor or the windshield wiper/washer switch. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
8 | With connector C3 of junction block 2 still disconnected and the washer switch in the off position: Test for continuity using a J 39200 , between cavity 5 of connector C3 of junction block 2 and ground. Is there continuity from cavity 5 to ground? | -- | ||
9 | Replace the WIP fuse. Is the replacement complete? | -- | -- | |
10 | With connector C3 of junction block 2 still disconnected and the washer switch in the off position:
Is there continuity from cavity 5 to ground? | -- | ||
11 | Repair the short to ground condition in the BLU wire between cavity 5 of connector C3 of junction block 2 and cavity 2 of the windshield washer pump connector. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
12 |
Is there continuity from cavity 11 to ground? | -- | ||
13 | Repair the short to ground condition in the BLU/YEL wire between cavity 11 of the windshield wiper/washer switch connector and cavity 1 of the windshield washer pump connector. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- |