GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Lumina VE 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Front and Rear Object Alarm Module Replacement

Front and Rear Object Alarm Module Replacement LWB SWBRHD

Removal Procedure
  1. Remove the rear window shelf panel assembly. Refer to Rear Window Shelf Trim Panel Replacement .

    2. Object Number: 1958025 Size: SH

    Important: Release the retaining lever before disconnecting the front and rear object sensor alarm module electrical connectors .

  2. Disconnect the front and rear object alarm module electrical connectors (4) from the front and rear object alarm module (2).
  3. Disconnect the front and rear object alarm electrical connector (1) from the front and rear object alarm (3).

    4. Object Number: 1958009 Size: SH
  4. Remove the front and rear object alarm module retaining clips (2).
  5. Remove the front and rear object alarm module from the vehicle (1).

Installation Procedure

    Object Number: 1958009 Size: SH
  1. Install the front and rear object alarm module (1) to the vehicle.
  2. Install the front and rear object alarm module retaining clips (2).

    3. Object Number: 1958025 Size: SH
  3. Connect the front and rear object alarm electrical connector (1) to the front and rear object alarm (3).
  4. Connect the front and rear object alarm module electrical connector (4) to the front and rear object alarm module (2).
  5. Install the rear window shelf panel assembly. Refer to Rear Window Shelf Trim Panel Replacement .
  6. If re-programming is required. Refer to Control Module References in Computer/Integrating Systems.

Front and Rear Object Alarm Module Replacement SWBLHD

Removal Procedure
  1. Remove the rear window shelf panel assembly. Refer to Rear Window Shelf Trim Panel Replacement.

    2. Object Number: 1958025 Size: SH

    Important: Release the retaining lever before disconnecting the rear object alarm module electrical connectors .

  2. Disconnect the rear object alarm module electrical connectors (4) from the rear object alarm module (2).
  3. Disconnect the rear object alarm electrical connector (1) from the rear object alarm (3).

    4. Object Number: 1958009 Size: SH
  4. Remove the rear object alarm module retaining clips (2).
  5. Remove the rear object alarm module from the vehicle (1).

Installation Procedure

    Object Number: 1958009 Size: SH
  1. Install the rear object alarm module (1) to the vehicle.
  2. Install the rear object alarm module retaining clips (2).

    3. Object Number: 1958025 Size: SH
  3. Install the rear object alarm electrical connector (1) to the rear object alarm (3).
  4. Install the rear object alarm module electrical connector (4) to the rear object alarm module (2).
  5. Install the rear window shelf panel assembly. Refer to Rear Window Shelf Trim Panel Replacement.
  6. If re-programming is required. Refer to Control Module References.