Removal Procedure
- Raise the seat to the full UP position, if equipped with power seats.
- Disconnect the electrical connectors from the power seat motors, if equipped.
- Remove the front lower speaker from the passenger seat, if equipped. Refer to Amplifier and/or Speaker Replacement - Front Seat in Entertainment.
- Remove the nuts (3) retaining the seat adjuster (2) to the seat riser (4).
- Remove the front seat and the seat adjuster from the seat riser.
- Remove the bolts retaining the seat adjuster from the seat.
- Remove the seat adjuster from the seat.
Installation Procedure
- Install the seat adjuster (2) to the seat.
- Install the bolts in order to retain the seat adjuster to the seat.
- Install the front seat and the seat adjuster (2) to the seat riser (4).
- Install the nuts (3) in order to retain the seat adjuster to the seat riser.
- Install the front lower speaker to the passenger seat, if removed. Refer to Amplifier and/or Speaker Replacement - Front Seat in Entertainment.
- Connect the electrical connectors to the power seat motors, if equipped.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the bolts in order to retain the seat adjuster (2) to the seat
to 25 N·m (18 lb ft).
Tighten
Tighten the nuts (3) in order to retain the seat adjuster (2) to the
seat riser (4) to 45 N·m (33 lb ft).
