GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Equinox 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Mass Airflow Sensor with Intake Air Temperature Sensor Replacement

Removal Procedure

    Object Number: 1834957 Size: SH
  1. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement.
  2. Disconnect the engine wiring harness electrical connector from the mass air flow (MAF)/intake air temperature (IAT) sensor.

    3. Object Number: 1834958 Size: SH
  3. Remove the MAF/IAT sensor screws.
  4. Remove the MAF/IAT sensor from the air cleaner assembly.
  5. Remove the MAF/IAT sensor seal.

Installation Procedure

    Object Number: 1834958 Size: SH
  1. Install the MAF/IAT sensor seal to the MAF/IAT sensor.
  2. Install the MAF/IAT sensor to the air cleaner assembly.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the MAF/IAT sensor screws.

    4. Tighten
    Tighten the screws to 4 N·m (35 lb in).


    Object Number: 1834957 Size: SH
  4. Connect the engine wiring harness electrical connector to the MAF/IAT sensor.
  5. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement.