GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Equinox 🢒 Engine 🢒 Engine Controls and Fuel - 2.8L, 3.0L, 3.2L, or 3.6L 🢒 Air Cleaner Outlet Duct Replacement

Removal Procedure

    Object Number: 1828316 Size: SH
  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement.
  2. Remove the positive crankcase ventilation (PCV) tube from the air cleaner outlet duct.

    3. Object Number: 1835408 Size: SH
  3. Loosen the air cleaner outlet duct clamps at the throttle body and the mass air flow (MAF)/intake air temperature (IAT) sensor.
  4. Remove the air cleaner intake duct from the MAF/IAT sensor and the throttle body.

Installation Procedure

    Object Number: 1835408 Size: SH
  1. Install the air cleaner intake duct to the MAF/IAT sensor and the throttle body.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Tighten the air cleaner outlet duct clamps at the throttle body and the MAF/IAT sensor.

    3. Tighten
    Tighten the clamps to 4 N·m (35 lb in).


    Object Number: 1828316 Size: SH
  3. Install the PCV tube to the air cleaner outlet duct.
  4. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement.