GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Cobalt 🢒 Vehicle Control Systems 🢒 Vehicle DTC Information 🢒 Engine Flywheel Replacement

Removal Procedure
  1. Remove the transmission. Refer to Transmission Replacement for the manual transmission or Transmission Replacement for the automatic transmission.

    2. Object Number: 412119 Size: SH
  2. Remove the flywheel.

Installation Procedure

    Object Number: 412119 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  1. Install the flywheel.

    2. Tighten
    Tighten the flywheel bolts to 53 N·m (39 lb ft) plus 25 degrees.

  2. Install the transmission. Refer to Transmission Replacement for the manual transmission or to Transmission Replacement for the automatic transmission.