GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Blazer - 4WD 🢒 Body 🢒 Instrument Panel, Gages, and Console 🢒 Ashtray Replacement

Removal Procedure

    Object Number: 600923 Size: SH
  1. Remove the instrument panel trimplate. Refer to Instrument Panel Accessory Trim Plate Replacement .
  2. Remove ashtray housing retaining screws.
  3. Move the ashtray housing rearward in order to disconnect the electrical connectors.
  4. Remove the clip that retains the electrical connectors to the instrument panel.
  5. Disconnect the electrical connectors.
  6. Remove the ashtray housing from the instrument panel.

Installation Procedure

    Object Number: 600923 Size: SH
  1. Install the ashtray housing to the instrument panel.
  2. Position the ashtray housing in order to connect the electrical connectors.
  3. Connect the electrical connectors.
  4. Install the electrical connector retaining clip to the instrument panel.

    5. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  5. Install the screws that retain the ash tray housing to the instrument panel.

    6. Tighten
    Tighten the screws to 1.9 N·m (17 lb in).

  6. Install the instrument panel trimplate. Refer to Instrument Panel Accessory Trim Plate Replacement .