Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
|
Important: A short to ground will cause an open fuse(s). Before performing this diagnostic procedure, inspect the fuse(s) for an open. | ||||
1 |
Did the right front door switch input toggle ON and OFF? | -- | Go to Step 2 | |
2 |
Did the right front door switch input toggle ON and OFF? | -- | Go to Step 3 | Go to Step 9 |
3 | Use a DMM in order to measure the resistance in CKT 650 between the right front door open switch connector terminal A and the ground splice pack G302. Is the measured resistance within the specified range? | 0-2 ohms | Go to Step 12 | Go to Step 4 |
4 |
Is the measured resistance within the specified range? | 0-2 ohms | Go to Step 6 | Go to Step 5 |
5 | Repair the open in CKT 650 between the right front door open switch connector terminal B and the right front door lock switch. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
6 | Use a DMM in order to measure the resistance in CKT 650 between the right front door lock switch connector terminal D and ground. Is the measured resistance within the specified range? | 0-2 ohms | Go to Step 7 | Go to Step 8 |
7 | Replace the right front door lock switch. Refer to Door Lock Switch Replacement in Doors. Is the repair complete? | -- | -- | |
8 | Repair the open in CKT 650 between the right front door lock switch connector terminal D and the ground splice pack G302. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
9 |
Did the right front door switch input toggle ON and OFF? | -- | Go to Step 10 | Go to Step 11 |
10 | Repair the open in CKT 395 between the right IP junction block connector C3 terminal C11 and the right front door open switch harness connector terminal D. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
11 | Replace the right IP junction block. Is the repair complete? | -- | -- | |
12 | Replace the right front door ajar (open) switch. Is the repair complete? | -- | -- | |
