Special Tools

J 37043 Parking Brake Cable Release Tool

Warning: Refer to Brake Dust Warning in the Preface section.

1. Raise the vehicle and suitably support. Refer to Lifting and Jacking the Vehicle.
2. Remove the left rear tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.
3. Pull down on the intermediate park brake cable (2) near the park brake connector (1).
4. Disconnect the intermediate park brake cable (2) from the park brake cable connector (1).



5. Disconnect the left rear park brake cable (2) from the equalizer (1).



6. Use the J 37043 in order to depress the left rear park brake cable retainer.
7. Remove the left rear park brake cable (2) from the left rear park brake cable support bracket (1).



8. Disconnect the left rear park brake cable (2) from the left rear park brake actuator lever (3).
9. Use the J 37043 in order to depress the retainer on the left rear park brake cable (2).
10. Remove the left rear park brake cable (2) from the left rear park brake cable support bracket (1).

1. Install the left rear park brake cable (2) to the left rear park brake cable bracket (1).
2. Ensure that the locking tabs are properly seated.
3. Connect the left rear park brake cable (2) to the left rear park brake actuator lever (3).



4. Install the left rear park brake cable (2) to the left rear support mounting bracket (1).
5. Ensure that the locking tabs are properly seated.



6. Connect the left rear park brake cable (2) to the equalizer (1).



7. Connect the intermediate park brake cable (2) to the park brake cable connector (1).
8. Install the left rear tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.
9. Lower the vehicle.
10. To ensure that the park brake cable retainers are seated, cycle the park brake pedal 1 to 2 times.