GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the right rear body side trim panel. Refer to Body Side Rear Trim Panel Replacement .

  2. Object Number: 1211149  Size: SH
  3. Remove the nuts (1) securing the module to the vehicle.
  4. Disconnect the electrical connectors.
  5. Remove the module.

Installation Procedure


    Object Number: 1211149  Size: SH
  1. Connect the electrical connectors.
  2. Locate the module the vehicle.
  3. Notice: Refer to Fastener Notice in the Preface section.

  4. Install the nuts (1) securing the processor to the vehicle.
  5. Tighten
    Tighten the nuts to 9 N·m (80 lb in).

  6. Install the right rear body side trim panel. Refer to Body Side Rear Trim Panel Replacement .