GM Service Manual Online
For 1990-2009 cars only

Object Number: 1824896  Size: MF

Callout

Component Name

Preliminary Procedures

  1. Remove the body side trim panel. Refer to Body Side Rear Trim Panel Replacement .
  2. Disconnect the power liftgate actuator rod. Refer to Liftgate Actuator Rod Replacement .

1

Liftgate Close Actuator Motor Control Module Bolt (Qty: 5)

Notice: Refer to Fastener Notice in the Preface section.

Procedure

    • Disconnect the electrical connector.
    • Cut the tie strap, if equipped.

Tighten
9 N·m (80 lb in)

2

Liftgate Close Actuator Motor Control Module

Procedure

If a replacement control module is installed, program the module. Refer to Control Module References .