Caution: Approved safety glasses and gloves should be worn when performing this procedure to reduce the chance of personal injury.

1. Remove the front door trim panel. Refer to Front Side Door Trim Panel Replacement .
2. Remove the mirror from the front door. Refer to Power Mirror Replacement or Remote Mirror Replacement .
3. Remove the mirror face. Refer to Outside Rearview Mirror Glass Replacement .



4. Remove the mirror motor screws.
5. Remove the mirror motor electrical harness through the mirror housing.
6. Remove the mirror motor from the mirror housing.

1. Route the mirror motor electrical harness through the mirror housing.
2. Position the mirror motor to the mirror housing.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

3. Install the mirror motor screws.

Tighten
Tighten the screws to 10 N·m (89 lb in).

4. Install the mirror to the front door. Refer to Power Mirror Replacement or Remote Mirror Replacement .
5. Install the mirror face. Refer to Outside Rearview Mirror Glass Replacement .
6. Install the front door trim panel. Refer to Front Side Door Trim Panel Replacement .
7. Check the mirror for proper operation.