Schematic Reference: Instrument Cluster Schematics

Did you perform the Instrument Cluster Diagnostic System Check?

--

Go to Step 2

Go to Diagnostic System Check - Instrument Cluster

1. Turn ON the ignition, with the engine OFF.
2. Press and release the Eng/Met switch.

Does the MPH indicator and then the KM/H indicator illuminate after each switch activation?

--

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

Go to Step 3

1. Install a scan tool.
2. Press the Eng/Met switch.
3. With a scan tool, observe the English/Metric Sw. parameter in the IPC data list.

Does the English/Metric Sw. parameter display Active?

--

Go to Step 4

Go to Driver Information Center (DIC) Switch Inoperative

Replace the IPC. Refer to Instrument Cluster Replacement .

Did you find and correct the condition?

--

Go to Step 5

--

Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

Go to Step 2