GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saab 🢒 2006 🢒 9-7x 🢒 Steering 🢒 Steering Wheel and Column 🢒 Ignition and Start Switch Replacement

Removal Procedure
  1. Remove the console shift lever bezel. Refer to Console Shift Lever Bezel Replacement .
  2. Remove the ignition switch assembly screws.

    3. Object Number: 1554774 Size: SH
  3. Disconnect the electrical connector.
  4. Remove the ignition switch.

Installation Procedure

    Object Number: 1554774 Size: SH
  1. Locate the ignition switch to the console.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the screws securing the switch to the console.

    3. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  3. Connect the electrical connector.
  4. Install the shift lever bezel. Refer to Console Shift Lever Bezel Replacement .