Step | Action | Value(s) | Yes | No | ||||
|---|---|---|---|---|---|---|---|---|
1 | Inspect the STOP LAMP fuse. Is the fuse open? | -- | Go to Step 2 | Go to Step 3 | ||||
2 | Repair a short to ground in one of the following circuits:
Is the repair complete? | -- | -- | |||||
3 | Use a test lamp in order to backprobe the stop lamp switch harness connector C1 between terminal A and ground. Did the test lamp light? | -- | Go to Step 4 | Go to Step 7 | ||||
4 |
Did the test lamp light? | -- | Go to Step 5 | Go to Step 6 | ||||
5 |
Does the test lamp light? | -- | Go to Step 9 | Go to Step 8 | ||||
6 | Adjust or replace the stop lamp switch. Refer to Stop Lamp Switch Replacement in Hydraulic Brakes. Is the repair complete? | -- | -- | |||||
7 | Repair the following conditions in CKT 140:
Is the repair complete? | -- | -- | |||||
8 | Repair the following conditions in CKT 17 between the stop lamp switch harness connector C1 terminal B and C203 terminal A8:
Is the repair complete? | -- | -- | |||||
9 | Repair the following conditions in CKT 17 between C203 terminal A8 and S415:
Is the repair complete? | -- | -- |
