Inspect the B/U LAMP Fuse for an open.

Is the fuse open?

--

Go to Step 7

Go to Step 2

1. Disconnect the transaxle range switch connector C1.
2. Use a test lamp in order to probe between the transaxle range switch harness connector C1 from terminal B and ground.

Did the test lamp light?

--

Go to Step 3

Go to Step 6

Connect a 15A fused jumper to the transaxle range switch harness connector C1 between terminal B and terminal F.

Did the backup lamps light?

--

Go to Step 5

Go to Step 4

1. Repair the following conditions in CKT 24 between the transaxle range switch harness connector C1 terminal F and S435.

•	A poor connection

•

An open

2. Inspect the system.

Is the repair complete?

--

System OK

--

1. Adjust or replace the transaxle range switch. Refer to Park/Neutral Position Switch Replacement
2. Inspect the system.

Is the repair complete?

--

System OK

--

1. Repair the following conditions in CKT 840:

•	A poor connection

•

An open

2. Inspect the system.

Is the repair complete?

--

System OK

--

1. Repair a short to ground in CKT 840, as needed.
2. Repair a short to ground in CKT 24, as needed.
3. Inspect the system.

Is the repair complete?

--

System OK

--