Step
| Action
| Value(s)
| Yes
| No
|
1
|
- Turn the ignition switch to the RUN position.
- Activate the inoperative turn signal.
Do the exterior turn lamps flash?
| --
| Go to
Step
2
| Go to
Exterior Lights System Check
in Lighting Systems
|
2
| Does the high beam indicator work
with the high beams on?
| --
| Go to
Step 3
| Go to
Instrument Cluster Illumination Lamps Inoperative
|
3
| Check for a poor connection or
open in the following circuits:
| • | (LH) circuit 18 between the instrument cluster harness
connector C2 terminal P and S233. |
| • | (RH) circuit 19 between the instrument cluster harness
connector C2 terminal R and S232. |
Is there a poor connection or open?
| --
| Go to
Step 4
| Go to
Step 5
|
4
| Repair the poor connection or open in the following circuits:
| • | (LH) circuit 18 between the instrument cluster harness
connector C2 terminal P and S233. |
| • | (RH) circuit 19 between the instrument cluster harness
connector C2 terminal R and S232. |
Has the repair been made and the system rechecked?
| --
| System OK
| --
|
5
|
- Check the warning indicator bulb and bulb connection.
- If OK, replace the instrument cluster. Refer to
Instrument Cluster Replacement
in Instrument Panel, Gauges
and Console.
Has the repair been made and the system rechecked?
| --
| System OK
| --
|
