Special Tools

J 36346 Fascia Retainer Remover

1. Remove the battery tray. Refer to Battery Tray Replacement.



2. Using the J 36346 , disconnect the shift control cable from the range selector lever.



3. Remove the range selector lever nut and lever.

Caution: Refer to Fastener Caution in the Preface section.




1. Install the range selector lever and lever nut, and tighten to 16 N·m (12 lb ft).



2. Install the shift control cable end fitting onto the ball stud of the range selector lever. An audible snap will be heard when properly installed.
3. Install the battery tray. Refer to Battery Tray Replacement.