GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Opel 🢒 2009 🢒 Antara 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Input Speed Sensor Replacement

Removal Procedure
  1. Remove the battery tray. Refer to Battery Tray Replacement.

    2. Object Number: 1371166 Size: SH
  2. Disconnect the wiring harness (4) from the input speed sensor.

    3. Object Number: 955475 Size: SH
  3. Remove the input speed sensor bolt.
  4. Remove the input speed sensor.
  5. Remove the input speed sensor O-ring. Discard the O-ring.

Installation Procedure

    Object Number: 955475 Size: SH
  1. Apply GM T-IV automatic transaxle fluid GM P/N 88900925 to the new input speed sensor O-ring.
  2. Install the new input speed sensor O-ring onto the input speed sensor.
  3. Install the input speed sensor to the transaxle.

    4. Caution: Refer to Fastener Caution in the Preface section.

  4. Install the input speed sensor bolt and tighten to 6 N·m (53 lb in).

    5. Object Number: 1371166 Size: SH
  5. Connect the wiring harness (4) to the input speed sensor.
  6. Install the battery tray. Refer to Battery Tray Replacement.