GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1758176  Size: SH
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the front wheel. Refer to Tire and Wheel Removal and Installation .
  3. Remove the front mud guard. Refer to Rear Mud Flap Guard Replacement .
  4. Remove the engine protection shield. Refer to Engine Protection Shield Replacement .
  5. Remove the screws and the front fender liner.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1758176  Size: SH
  1. Install the screws and the front fender liner.
  2. Tighten
    Tighten the front fender liner screws to 4 N·m (35 lb in).

  3. Install the engine protection shield. Refer to Engine Protection Shield Replacement .
  4. Install the front mud guard. Refer to Rear Mud Flap Guard Replacement .
  5. Install the front wheel. Refer to Tire and Wheel Removal and Installation .
  6. Lower the vehicle.