GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1763658  Size: SH
  1. Disconnect the negative battery cable.
  2. Remove the knee bolster. Refer to Knee Bolster Replacement .
  3. Remove the RFA receiver.
  4. Important: Perform the SPO reprogramming when the RFA receiver is replaced. Refer to Transmitter Programming .

  5. Disconnect the electrical connector.

Installation Procedure


    Object Number: 1763658  Size: SH
  1. Connect the electrical connector.
  2. Install the RFA receiver.
  3. Install the knee bolster. Refer to Knee Bolster Replacement .
  4. Connect the negative battery cable.