GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Opel 🢒 2007 🢒 Antara 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Engine Oil Pressure Sensor and/or Switch Replacement

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1804747 Size: SH
  1. Disconnect the negative battery cable.
  2. Remove the engine dress cover. Refer to Section 1C2, Engine Mechanical - HFV6 3.2L.
  3. Drain the engine oil by removing the engine oil drain plug.
  4. Disconnect the wiring harness connector from the engine oil pressure sensor.

    5. Object Number: 1804751 Size: SH
  5. Remove the engine oil pressure sensor.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1804751 Size: SH
  1. Install the oil pressure sensor.

    2. Tighten
    Tighten the engine oil pressure sensor to 13 N·m (115 lb in).

  2. Connect the engine oil pressure sensor connector.