GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 1998 🢒 Silhouette Ext. 🢒 Engine 🢒 Engine Electrical 🢒 Generator Bracket Replacement

Removal Procedure

    Object Number: 162173 Size: SH
  1. Remove the generator. Refer to Generator Replacement .
  2. Remove the generator bracket bolts.
  3. Remove the generator bracket.

Installation Procedure

    Object Number: 162173 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  1. Install the generator bracket to the engine with the generator bracket bolts.
  2. Tighten the generator bracket bolts in the sequence shown.

    3. Tighten
    Tighten the generator bracket bolts in the sequence shown to 50 N·m (37 lb ft).

  3. Install the generator. Refer to Generator Replacement .