GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 1998 🢒 LSS 🢒 Body and Accessories 🢒 Instrument Panel, Gauges, and Console 🢒 Knee Bolster Deflector Replacement - Left Side

Removal Procedure

    Object Number: 324783 Size: MH
  1. Remove the IP knee bolster. Refer to Instrument Panel Knee Bolster .
  2. Remove the IP driver knee bolster deflector fasteners.
  3. Remove the deflector (9).

Installation Procedure

    Object Number: 324783 Size: MH
  1. Align the IP driver knee bolster deflector (9).

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the deflector fasteners.

    3. Tighten
    Tighten the fasteners to 10 N·m (88 lb in).

  3. Install the IP knee bolster. Refer to Instrument Panel Knee Bolster .