Connector end views show the cavity or terminal locations for all the related 2-pin or larger connectors shown in the system schematic(s). The drawings show the connector's face as seen after the harness connector has been disconnected from a component or mating connector. Unused cavities are left blank in the table.

In addition, the color and part number of the connector body is provided along with the family/series name.

Below is an example of a typical connector end view.

Connector Part Information		•  12052644     •  2 Way F Metri-Pack 150 Series Sealed (GRY)
Pin	Wire Color	Circuit No.	Function
A	BLK	250	Ground
B	DK GRN	29	Horn Feed