GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2001 🢒 Intrigue 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Front Fog Lamp Replacement

Removal Procedure

    Object Number: 182449 Size: SH
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Disconnect the electrical connector from the front fog lamp assembly.

    3. Object Number: 181780 Size: SH
  3. Remove the nuts retaining the front bumper fascia lower support to the front fog lamp bracket.
  4. Remove the fascia lower support from the vehicle.

    5. Object Number: 324213 Size: SH
  5. Remove the nuts retaining the front fog lamp assembly to the front bumper impact bar.
  6. Remove the front fog lamp assembly from the vehicle.

Installation Procedure

    Object Number: 324213 Size: SH
  1. Install the front fog lamp assembly into position on the front bumper impact bar.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the front fog lamp assembly to the front bumper impact bar retaining nuts.

    3. Tighten
    Tighten the front fog lamp assembly retaining nuts to 10 N·m (89 lb in).


    Object Number: 181780 Size: SH
  3. Install the front bumper fascia lower support to the vehicle.
  4. Install the front bumper fascia lower support to the front fog lamp bracket retaining nuts.

    5. Tighten
    Tighten the front bumper fascia lower support retaining nuts to 10 N·m (89 lb in).


    Object Number: 182449 Size: SH
  5. Connect the electrical connector to the front fog lamp assembly.
  6. Lower the vehicle.
  7. Check the front fog lamp aim, If a new front fog lamp assembly was installed, or if service or repairs in the front end area may have disturbed the front fog lamp assembly mounting. Refer to Fog Lamp Aiming .