Clutch Rotor and Bearing Removal V7 - Direct Mount

Tools Required

1. Remove the A/C compressor from the vehicle.
2. Clamp J 41790-A in a vise and attach the A/C compressor to J 41790-A .



3. Remove the clutch plate and hub assembly. Refer to Compressor Clutch Plate and Hub Assembly Removal .
4. Using external snap ring pliers (1), remove the retaining ring (3) from the clutch rotor and bearing assembly.



5. Place J 33023-A on the clutch rotor.



6. Install J 41552 down into the inner circle of slots in the rotor. Turn J 41552 clockwise in the slots to engage the puller tangs with the rotor.
7. Hold J 41552 in place and use a wrench to turn the center forcing screw against J 33023-A to remove the clutch rotor and bearing assembly.