The instrument panel cluster (IPC) turns the ABS Indicator on during the IPC bulb check for approximately 3 seconds when the ignition switch is turned to the ON position. If the EBCM sets a diagnostic trouble code (DTC) the EBCM sends the IPC the command to turn the ABS indicator on.
The numbers below refer to step numbers on the diagnostic table.
Step | Action | Value(s) | Yes | No |
---|---|---|---|---|
DEFINITION: The ABS indicator does not come on during the IPC bulb check. | ||||
1 | Was the ABS Diagnostic System Check performed? | -- | ||
Using a scan tool in the Instrument Panel (IPC) Special Functions attempt to turn the ABS indicator on. Did the ABS indicator turn on? | -- | |||
3 | Replace the EBCM. Refer to Electronic Brake and Traction Control Module Replacement . Is the replacement complete? | -- | -- | |
4 |
Is the ABS Indicator bulb OK? | -- | ||
5 | Replace the ABS Indicator bulb. Refer to Instrument Cluster Bulb Replacement in Instrument Panel, Gauges and Console. Is the replacement complete? | -- | -- | |
6 | Replace the Instrument Panel Cluster. Refer to Instrument Cluster Replacement in Instrument Panel, Gauges and Console. Is the replacement complete? | -- | -- |