STEERING SHORT GEAR INSTALL. TIME & PART # INFORMATION

MODELS/YEARS: 1982-84 FIRENZA, OMEGA, CUTLASS CIERA & 1985 NINETY-EIGHT

The Labor Time Allowance to install a steering short gear on certain models indicated in Dealer Technical Bulletin 85-T-4 has been revised. Refer to the chart below for the revised time allowance to perform this repair.

Labor Time Allowance

Operation Labor Usage Year/Model Number Time ----- ---------- --------- ----- Automatic Transaxle 1982 Cutlass Ciera, Omega E9730 2.2 Automatic Transaxle 1983 Cutlass Ciera, Omega E9730 2.2 Automatic Transaxle 1984 Cutlass Ciera, Omega E9730 2.2 Manual Transaxle 1982-84 Omega E9730 1.9 Automatic Transaxle 1982-84 Firenza E9730 2.7 Manual Transaxle 1982-84 Firenza E9730 2.5 Automatic Transaxle 1985 Ninety-Eight E9730 2.1

Use applicable trouble code and failed part number.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.