For 1990-2009 cars only
Removal Procedure
- Remove the pushrod retainer (3) from the brake pedal pin (4).
- Remove the stop lamp switch (1) and the pushrod (2) from the brake pedal pin (4).
- Disconnect the electrical connector and remove the stoplamp switch (1).
Installation Procedure
- Install the electrical connector on the stop lamp switch (1).
- Position the stop lamp switch (1) on the pushrod (2) and install on the brake pedal pin .
- Install the pushrod retainer (3) to the brake pedal pin (4). The retainer will snap into place.
