GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2003 🢒 Bravada 🢒 Driveline/Axle 🢒 Transfer Case - NVG 126-NP4 🢒 Transfer Case Rear Output Shaft Speed Sensor Replacement - Right Side

Removal Procedure
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .

    2. Object Number: 746671 Size: SH
  2. Remove the transfer case right rear speed sensor electrical connector.
  3. Remove the transfer case right rear speed sensor.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 746671 Size: SH
  1. Install the transfer case right rear speed sensor.

    2. Tighten
    Tighten the sensor to 17 N·m (13 lb ft).

  2. Install the transfer case right rear speed sensor electrical connector.
  3. Lower the vehicle. Refer to Lifting and Jacking the Vehicle .