Rear Seat Cushion Bracket Replacement TrailBlazer, Envoy, Bravada

1. Remove the rear seat cushion assembly from the vehicle. Refer to Rear Seat Cushion Replacement .



2. Remove the 2 bolts securing the bracket assembly to the seat cushion.



3. Remove the bracket assembly from the seat cushion.

1. Position the bracket assembly on the seat cushion.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.




2. Install the 2 bolts securing the bracket assembly to the seat cushion.

Tighten
Tighten the rear seat cushion bracket bolts to 25 N·m (18 lb ft).

3. Install the rear seat cushion assembly in the vehicle. Refer to Rear Seat Cushion Replacement .

Rear Seat Cushion Bracket Replacement TrailBlazer EXT, Envoy XL

1. Remove the seat from the vehicle. Refer to Rear Seat Replacement .



2. Remove the rear seat bracket trim covers (1).
3. Remove the rear seat cushion bracket mounting nuts (2).
4. Remove the rear seat cushion bracket.

Notice: Refer to Fastener Notice in the Preface section.




1. Install the rear seat cushion bracket to the seat cushion bottom with the four mounting nuts (2).

Tighten
Tighten the rear seat cushion bracket mounting nuts to 25 N·m (18 lb ft).

2. Install the rear seat bracket trim covers (1).
3. Install the seat in the vehicle. Refer to Rear Seat Replacement .