GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2002 🢒 Bravada 🢒 Body and Accessories 🢒 Interior Trim 🢒 Rear Window Garnish Molding Replacement

Removal Procedure
  1. Open the liftgate.

    2. Object Number: 721365 Size: SH
  2. Release the clips that retain the garnish molding to the liftgate.
  3. Remove the wire harness (1) from the slot located on the garnish molding.
  4. Remove the garnish molding from the liftgate.

Installation Procedure

    Object Number: 721365 Size: SH
  1. Position the garnish molding to the liftgate.
  2. Install wire harness (1) into the slot located on the garnish molding.
  3. Index the locating tabs to the corresponding holes in the liftgate.
  4. Index the retaining clips to the liftgate.
  5. Push the garnish molding into the liftgate in order to fully seat the retaining clips.
  6. Close the liftgate.