For 1990-2009 cars only
Removal Procedure
- Remove the push-in retainers securing the outer rear hood seal to the body.
- Remove the outer rear hood seal from the vehicle.
- Starting on either side, work the center rear hood seal off by pulling it straight away from the flange.
- Remove the seal from the vehicle.
Installation Procedure
- Install the center rear hood seal to the vehicle by pushing it firmly over the flange.
- Use the bends in the flange behind the strut towers to align the seal properly.
- Position the outer rear hood seal to the vehicle.
- Install the push-in retainers in order to secure the outer rear hood seal to the vehicle.
