Rear Compartment Lid Latch Replacement w/o Inside Release Handle

1. Remove the rear compartment lid trim. Refer to Rear Compartment Lid Inner Panel Trim Replacement .



2. Disconnect the electrical connectors from the lid latch assembly.
3. Remove the latch cable from the back of the lock cylinder.
4. Remove the fasteners retaining the lid latch assembly to the rear compartment lid.
5. Remove the lid latch assembly.

1. Position the lid latch assembly to the rear compartment lid.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the fasteners in order to retain the lid latch assembly to the rear compartment lid.

Tighten
Tighten the fasteners 10.5 N·m (93 lb in).

3. Connect the electrical connectors to the lid latch assembly.
4. Install the rear compartment lid trim. Refer to Rear Compartment Lid Inner Panel Trim Replacement .