GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2003 🢒 Aurora 🢒 Restraints 🢒 SIR 🢒 Memory Seat Control Module Replacement

Removal Procedure
  1. Disable the SIR system. Refer to SIR Disabling and Enabling in SIR.
  2. Remove the fasteners securing the seat cushion to the adjuster track. Refer to Front Seat Cushion Replacement .
  3. Lift the front of the seat cushion up in order to gain access to the memory seat module.

    4. Object Number: 295290 Size: SH

    Notice: Note the correct routing of the electrical wiring. Failure to reinstall the wiring properly could result in damage to the wiring.

  4. Disconnect the electrical connectors from the memory seat module.
  5. Remove the fasteners securing the memory seat module to the seat cushion frame.
  6. Remove the memory seat module from the bottom of the seat cushion.

Installation Procedure
  1. Position the memory seat module to the bottom of the seat cushion.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the memory seat module fasteners.

    3. Tighten
    Tighten the fasteners to 2 N·m (18 lb in).


    Object Number: 295290 Size: SH
  3. Install the electrical connectors to the memory seat module.
  4. Ensure the wiring harness is positioned in the original location.
  5. Install the seat cushion. Refer to Front Seat Cushion Replacement .
  6. Enable the SIR system. Refer to SIR Disabling and Enabling in SIR.
  7. Calibrate the seat. Refer to Memory Seat Calibration .